+34 902 551 583

Fire Reaction

Fire Reaction Radiant Panel

Radiant Panel is designed to perform fire reaction tests of floor coverings. It determines the burning behavior by a radiant heat source.
Read more

Fire Propagation Apparatus F.P.A.

Fire Propagation Apparatus equipment or FPA (ASTM E2058-13, ANSI/FM 4910) has been designed for fire reaction tests

Read more

Lateral Flame Spread Apparatus

Lateral Flame Spread Apparatus L.F.S. evaluates the susceptibility of the surfaces of the support materials and the propagation of the flame…

Read more

Cone Calorimeter (ISO 5660-1)

Cone calorimeter (ISO 5660-1) for fire reaction tests is designed to quantify the amount of heat which releases a sample exposed to controlled levels of radiation.

Read more

Single Burning Item (SBI) EN 13823

Single Burning Item “SBI” is suitable to perform fire reaction tests of construction materials according to the standards BS UNE EN 13823.

Read more

Smoke Density Chamber

Smoke Density Chamber equipment to perform fire reaction tests is designed to evaluate the specific optical density of smoke generated by solid materials

Read more

Room Corner Test ISO 9705

Room Corner Test to perform fire reaction tests simulates a fire in a well-ventilated conditions started in a corner of a small room with one door open according to the standard ISO 9705:1993.

Read more

Non-Combustibility Apparatus

Non-combustibility furnace (ISO 1182, IMO FTPC Part 1, ASTM E2652-12) to perform fire reaction tests is automated through the use of power electronic systems.

Read more

Isoperibolic Calorimetric Pump

Isoperibolic Calorimetric Pump for tests of fire reaction is an equipment that is used to determine the calorific power of solids and liquids

Read more

Single Flame Source Test

In the Single Flame Cabine for fire reaction tests, the sample is exposed in a vertical position in an U-Shaped sample carrier, to the action of a single flame source of 20 mm high for 15 o 30 seconds inside the cabin.

Read more

REFO Chamber UNE 23721

In the REFO Chamber UNE 23721 for fire reaction tests, the samples are subjected to radiation from a source of constant heat, causing inflammation of gases from the combustion propagation according to the standard

Read more

Smoke Chamber UNE 23723

In the Smoke Chamber for tests for fire reaction submitted the samples to the double action of the calorific radiation and calorific radiation and heated gases causing the inflammation of the emitted gases

Read more

Horizontal Flammability Chamber

In the Horizontal Flammability Chamber for fire reaction tests, the sample is exposed to the action of a low-energy flame for 15 seconds. This test determines how the sample works

Read more

Vertical Flammability Chamber

Vertical Flammability Chambers for fire reaction tests perform the test with the sample in a vertical position and it is used to analyze the properties ignition resistant of clothes, tents and materials

Read more

Smoke Extraction Chamber

Smokes Extraction Chamber is an equipment designed for the evacuation of the fumes in laboratory tests of fire performance in materials such as fabrics, plastics, foams, etc…

Read more

Draperies Equipment EN 13772

Draperies equipment (EN 13772) to perform fire reaction tests consists of applying a flow of heat from a defined energy to a specified area at the bottom of the backside of the vertical sample.

Read more